Supply List

Advanced Hollow Construction

Corcoran College of Art + Design Cont. Ed.

Fall 2012- Jenn Parnell, teacher

Materials Sheet

Supplies to purchase:

Dividers

Digital Calipers

Scribe

Ruler with metric measurements

Extra-fine point sharpies

Sandpaper (320, 400, 600)

Scotchbrite and/or steel wool

Slitting needle file (cut 2- available from Otto Frei)

Flat bottom riffle file (231-900-2 at Contenti)

Hard and Medium solder

Drill Bits (assorted sizes)

Saw blades (1/0, 2/0, 4/0)

Metals:

For the first set of forms, use 20ga brass sheet. Brass is preferred over copper for this. You will likely need most of a 12x6 sheet for this.

For your 2 projects, you can use whatever metal you like. I would recommend staying in the 18-22ga range, but metal choice is up to you.

Copper, brass and nickel sheet are available for purchase in the studio during class time. Sterling or gold sheet needs to be personally ordered by you.